WD My Passport · My Book · hardware encryption on the USB board · no password set, still encrypted · failed USB port
External drives that encrypt in hardware. You may never have set a password. The drive was encrypting everything regardless, and the key is in the little circuit board with the USB socket.
Several ranges of external hard drive encrypt all data on the way to the disk, using a chip on the USB bridge board. Setting a password in the maker's software adds a lock on that key. Setting none leaves the encryption running with the key held by the board. When the USB socket or bridge board fails and the drive is connected directly to a computer, it appears blank or unformatted, because what is on the platters is encrypted. The original board, or its key material, is part of the recovery.
Tell us what the screen says and whether you have the key; you hear what is possible before any fee is taken
0800 6890668
With the drive's USB bridge board and reserved areas of the drive; an optional user password locks it further.
What can be recovered.
Case by case.
| Situation | What is happening | What is needed | Outlook |
|---|---|---|---|
| USB socket broken off | Board damaged, drive fine | Repair the board or transfer its key chip | Good outlook |
| Drive connected by SATA shows unallocated | You are seeing encrypted data | Do not initialise; original board needed | Good with the board |
| Drive clicking, board fine | Mechanical fault under hardware encryption | Mechanical repair, image, decrypt with the key material | Fair |
| Password set and known | Extra lock on the key | Supply the password | Recoverable |
| Password set and forgotten | Key cannot be released | None | Not recoverable |
The limits.
Where a password was set and is lost, the hardware will not release the key.
Without the original board or its key material, the platters hold only encrypted data.
Initialising or formatting the bare drive overwrites encrypted sectors.
In more detail.
Encryption you did not ask for
On these drives the bridge board encrypts every sector written and decrypts every sector read. The owner sees an ordinary drive. Nothing suggests that encryption is in use until the board fails. Then the well-meant fix, taking the drive out of its case and connecting it straight to a PC, produces a drive that Windows wants to initialise. The data is there and it is encrypted. Initialising or formatting at that point damages it.
Keep every part
The enclosure, the bridge board and any broken-off connector should all come with the drive. On many models the board is integral to the drive and cannot be swapped casually, and where a replacement is used it has to match closely and be given the original's key material. Security researchers have published weaknesses in some older models of this kind, but that is not a service anyone should rely on, and the practical route is the original hardware.
If a password was set
The maker's software lets the owner set a password, which protects the key held by the hardware. With the password, recovery proceeds as above. Without it the hardware will not release the key and there is nothing a laboratory can do. If you have never opened the maker's security software, you almost certainly did not set one, and the hardware alone holds the key.
- Wikipedia: Opal Storage Specification (summary and references to the Radboud research) — en.wikipedia.org/wiki/Opal_Storage_Specification
- Microsoft Security Response Center: ADV180028, guidance for configuring BitLocker to enforce software encryption — msrc.microsoft.com/update-guide/en-us/vulnerability/ADV180028
Quotations were checked against the sources named on 15 November 2026. Microsoft and Apple revise their pages, so follow the links for the current wording. None of the companies named has any connection with this site.
Asked about this.
I never set a password. Why is it encrypted?
On these models encryption is always on. The password is an optional extra lock.
Can I buy the same model and swap the board?
Sometimes that works and often it does not, because the key material is unique. Do not write to the drive while trying.
Windows asks to initialise the disk.
Decline. Initialising writes to an encrypted drive.
Do not reset it. Tell us what the screen says.
Say what the screen shows, what kind of drive it is and whether you have the key or password. Within a working day you hear what is possible and what is needed, free of charge. Forensic decryption is £400 + VAT flat per drive, taken when the drive is booked in and payable whether or not data is recovered. Until then, change nothing on the computer.