Forensic decryption, one flat fee: £400 + VATBitLocker, FileVault, VeraCrypt, LUKS, NAS · 5 working daysScreen in front of you?0800 6890668
EDREncrypted Data Recovery 0800 6890668 Start recovery
REF 1/02EDR / The screen says / After a BIOS or firmware update

Firmware update · Secure Boot changed · TPM cleared · boot order · put it back, or find the key

BitLocker after a BIOS or firmware update. The computer has not changed as far as you can see. As far as BitLocker can see, it has.

The TPM releases the BitLocker key only when the firmware and start-up settings measure the same as before. Update the BIOS, switch Secure Boot off, clear the TPM or change the boot order, and the measurements differ. BitLocker then asks for the recovery key. If the change was a setting, putting it back can make the prompt go away. If it was an update or a cleared TPM, the key is the only way in.

The drive is imaged firstDecrypted with your keyNo key anywhere: we say so£400 + VAT flat

Tell us what the screen says and whether you have the key; you hear what is possible before any fee is taken
0800 6890668

On the screen1/02
BitLocker needs your recovery key to unlock your drive because Secure Boot has been disabled.
A Windows 11 24H2 recovery screen as transcribed by a user on Microsoft's Q&A forum

What it means for your files.

RecoverableYour files, with the key or with the setting put back
FromThe firmware set-up screens and wherever the key was saved
Not recoverableA way in if the TPM has been cleared and no key exists

Case by case.

SituationWhat is happeningWhat you seeWhat to do
Secure Boot was switched offScreen reason: Secure Boot has been disabledE_FVE_SECUREBOOT_DISABLEDSwitch it back on in the firmware and restart
Secure Boot keys or policy changedThe boot chain no longer matchesE_FVE_SECUREBOOT_CHANGEDThe recovery key is needed
TPM disabled in the firmwareThe chip cannot be asked for the keyE_FVE_TPM_DISABLEDRe-enable it; do not clear it
TPM clearedThe sealed key has been erased from the chipE_FVE_TPM_NOT_DETECTED or a mismatchOnly the recovery key will work
BIOS or UEFI firmware updatedMicrosoft lists this among the documented causesE_FVE_PCR_MISMATCHEnter the key once; it should not ask again

Do, and do not.

Do

  • Press Alt on the recovery screen and note the error code
  • Put back any firmware setting that was changed
  • Look for the key while the PC stays as it is
  • Back the key up as soon as you are in

Do not

  • Clear, reset or erase the TPM
  • Flash the firmware again in the hope of undoing it
  • Reset Windows
  • Swap the drive between machines repeatedly

In more detail.

What the TPM is checking

At each start the firmware records measurements of itself and of the boot software into the TPM. BitLocker sealed its key against those measurements. Microsoft's list of things that cause recovery includes 'Turning off, disabling, deactivating, or clearing the TPM', 'Upgrading critical early startup components, such as a BIOS or UEFI firmware upgrade' and 'Having the CD or DVD drive before the hard drive in the BIOS boot order'. None of these harms the data. Each one makes the chip refuse.

When putting it back works

If you, a repair shop or a firmware reset changed a setting, restoring it can let the TPM release the key again. The usual candidates are Secure Boot, the TPM being enabled, the boot mode and the boot order. Change one thing at a time and note what it was. Do not choose any option that says clear, reset or erase the TPM: that removes the sealed key for good, and after it only the recovery key can open the drive.

The newer screen tells you more

From Windows 11 version 24H2, the recovery screen shows a hint of the Microsoft account that holds the key, and pressing Alt opens an additional information screen with an error code. Codes such as E_FVE_SECUREBOOT_DISABLED or E_FVE_TPM_DISABLED point to a setting that can be put back. E_FVE_PCR_MISMATCH means the measurements changed and does not say which one.

Sources
  1. Microsoft Learn: BitLocker recovery overview — learn.microsoft.com/en-us/windows/security/operating-system-security/data-protection/bitlocker/recovery-overview
  2. Microsoft Learn: BitLocker preboot recovery screen — learn.microsoft.com/en-us/windows/security/operating-system-security/data-protection/bitlocker/preboot-recovery-screen
  3. Microsoft Support: Find your BitLocker recovery key — support.microsoft.com/en-us/windows/security/encryption/find-your-bitlocker-recovery-key
  4. Microsoft Support: BitLocker overview — support.microsoft.com/en-us/windows/security/encryption/bitlocker-overview

Quotations were checked against the sources named on 15 November 2026. Microsoft and Apple revise their pages, so follow the links for the current wording. None of the companies named has any connection with this site.

Asked about this screen.

A repair shop updated the BIOS. Who has the key?

Whoever set the PC up. Usually it is in the owner's Microsoft account. The shop will not have it unless they saved it.

Should I clear the TPM to start again?

No. Clearing it destroys the copy of the key the TPM was holding.

It asks for the key at every start now.

Enter it, then suspend and resume BitLocker from within Windows so it reseals to the new firmware. Back the key up first.

Do not reset it. Tell us what the screen says.

Say what the screen shows, what kind of drive it is and whether you have the key or password. Within a working day you hear what is possible and what is needed, free of charge. Forensic decryption is £400 + VAT flat per drive, taken when the drive is booked in and payable whether or not data is recovered. Until then, change nothing on the computer.